Atlas Power Amplifier

- 55 WPC
- 20Hz-30Khz bandwidth
- 4 and 8 ohm taps
- EL-34 output tubes, (2) 12AU7 driver tubes,
  (2)12AX7 input tubes
- Optional cover (￥20,000)
- 18” W X 17” D X 5.5” H
- 50 lbs (55 lbs shipping weight)

Retail Price: ￥280,000

Reviews:

English: Stereophile, Recommended Component April 2007

English: Stereophile, March 2007

English: www.soundstage.com

English: Hi-Fi+ Magazine, July 2005

Metis Preamplifier

- (2) 6SN7 line stage tubes
- 12 dB gain line stage
- Slow start feature extends tube life
- Solid state phono w/ 35dB gain (before preamp)
- Headphone amplifier
- (3) line level inputs, (1) phono input
- (1) variable output, (1) fixed output
- 18” W X 12.5” D X 4.5” H
- 16 lbs (22 lbs shipping weight)

Retail Price: ￥185,000

Reviews

English: The Absolute Sound "Budget Component of the Year"

English: www.soundstage.com

English: Hi-Fi+ Magazine, July 2005

Cronus Integrated Amplifier

- 55 WPC

- Remote volume control included
- 20Hz-30Khz bandwidth
- EL-34 output tubes, (3) 12AU7,
  (2)12AX7 small signal tubes
- Phono section gain 35dB (before preamp)

- (3) line level inputs, (1) phono input
- (1) variable output, (1) fixed output
- Headphone amplifier
- 4 and 8 ohm taps
- Optional cover ($100)
- 18” W X 17.5” D X 5.5” H
- 50 lbs (55lbs shipping weight)

Retail Price: ￥335,000

Zeus Power Amplifier

Incredibly powerful, yet fast and nimble, the Zeus amplifier sets a new standard in the "Superamp" category. Utilizing cutting edge technology, this statement amplifier was engineered from the ground up with a single design goal – to be the finest tube amp available. Designed not only to achieve the highest levels of delicacy and transparency, Zeus is also capable of recreating true concert hall volumes and dynamics. One listen and you will know why we called it Zeus.

This completely dual mono design has a power output of 225 WPC in Ultralinear mode. With a unique and elegant appearance, Zeus boasts a 1" thick machined aluminum faceplate and all aluminum machined body panels. An on the fly switch offers the choice between Triode and Ultralinear operation. A second standby switch allows the amplifier to remain warmed up and ready for immediate use between listening sessions. Built in meters and individual bias switches makes tube biasing a snap even for the tube novice. The rear panel contains balanced and single ended inputs as well as 4 and 8 ohm binding posts.

General Features:
- Completely dual mono design
- Massive high storage power supply
- Ultra-high performance transformers
- Built in bias meters and bias tool
- All precision components
- 12 x KT88, 4 x 12AU7, 2 x 12AX7 tube complement
- 1" thick machined aluminum faceplate
- Heavy-duty gold plated RCA connectors
- Heavy-duty gold plated binding posts
- Balanced and RCA inputs
- Both 4 and 8 ohm binding posts
- User selectable triode/ultralinear output
- Fully tested, burned-in, and auditioned
- Entirely designed and built in the USA

Specifications: [back to top]
- Output power: 225 WPC
- THD: less than 0.1% typical, 1% at peak
- frequency response:
- 20Hz -20KHz at full output, 10Hz -100KHz at 10 watts
- Input sensitivity: 1.0V RMS
- Dimensions: 19" W x 24" D x 12" H
- Weight: 200 lbs
- power requirements: 100V - 50/60Hz

Retail Price: ￥1,350,000

Stereo 90 Amplifier

Whether your tastes run to the delicate strains of the violin or the wail of the electric guitar, the Rogue Stereo 90 power amplifier will thrill you with its precision, musicality, and impact. And with 90 watts of pure tube power, you can be sure that your amplifier won’t run out of steam before the musicians do. The heart of the Stereo 90 consists of four matched KT88/6550 output tubes operating in push-pull configuration. A massive fully regulated power supply ensures that low frequency information will not go unheard, and that the power and attack of transient musical passages will be recreated in full. And with a simple flip of a switch, audiophiles can choose between "pure triode" and "ultra-linear" operation to suit their tastes and power requirements. The transparency and power of the Stereo 90 is testimony to a design that truly transcends that of the competition.

While the build quality is readily evidenced in the exquisitely sculpted appearance of the Stereo 90, the beauty of this amplifier is more than just skin deep. From the heavy-duty gold plated RCA inputs to the custom wound output transformers, the audio signal travels through only the finest components available. With this winning combination of leading edge circuit topology, great components, and a stunning appearance, you can be certain that you are investing in amplifier design that only Rogue Audio can deliver.
 

General Features:
- Ultra-wide bandwidth output transformers
- Massive fully regulated high voltage supply
- Matched quad output tubes

- Heavy-duty gold plated RCA inputs

- Heavy-duty gold plated binding posts
- User selectable 4 and 8 ohm output taps
- User selectable triode or ultralinear output
- (4) KT88/6550, (2) 6SN7, (2) 12AX7 tube complement
- Built in bias meter

- Integral tube cage
- Machined aluminum faceplate
- Mechanically isolated transformers
- Heavy (2 ounce) copper circuit board
- All precision components
- Fully tested, burned in, and auditioned
- 2 year limited warranty

Specifications: [back to top]
- output power: 90 WPC minimum

- input impedance: 200K Ohms
- frequency response: 5Hz - 50KHz ± 1dB
- THD: <0.1% typ., <1.0% at rated power
- input sensitivity: 1.0V RMS
- dimensions: 18"W x 15¾"D x 7"H
- weight: 60 lbs.
- power requirements: 100V - 50/60Hz

Retail Price: ￥390,000

Reviews:

English: the Absolute Sound April 2007

English: Ultra High Fidelity Magazine #74

M-150 Monoblocks

Power, Grace, and Precision -- when you are ready for the ultimate in vacuum tube amplification, look no further than the Rogue Audio M-150 monoblocks. With 150 Watts of pure tube power, the M-150's stunningly accomplish the impossible. After drawing the curtains aside on a soundstage of full height, width, and depth, the pace and musicality of the M-150's provide a riveting performance that will leave you breathless. And along with their profound sonic merits, the M-150 monoblocks are aesthetically exquisite amplifiers that will stoically serve as the cornerstones of your system.

Using circuitry derived from our Zeus amplifier, the M-150 is marked by an exceptional design that places it squarely at the forefront of tube technology. Just a few of the notable features are a "slow start" logical turn-on for extended tube life, a massive high capacity power supply, and the ability to externally switch between either ultra-linear or pure triode operation.The highly efficient design also means cool running and greatly extended tube life. Other refinements include balanced (XLR) and RCA inputs, mechanically isolated transformers, matched octets of KT88 output tubes, and separate 4 and 8 ohm taps on the rear. In keeping with Rogue Audio's "quality by design" philosophy, only the finest components are used in the amplifier's construction, truly making the M-150 ... An Intelligent Indulgence.
 

General Features:
- Ultra-wide bandwith output transformers
- Massive high storage power supply
- True balanced and single ended inputs

- Heavy-duty gold plated XLR and RCA inputs

- External switch for triode or ultralinear operation
- Integral bias meter makes biasing a snap

- (4) KT88, (2) 12AU7, (1) 12AX7 tubes (ea.)

- Both 4 and 8 ohm output taps provided

- 1/2" machined and engraved faceplate
- Heavy-duty gold plated binding posts

- All precision components
- Mechanically isolated transformers
- Welded-wire tube cage
- Heavy (2 ounce) copper circuit board
- Machined aluminum faceplate
- Matched octets of output tubes
- Entirely designed and built in the USA
- Fully tested, burned-in, and auditioned
- 2 year limited warranty

Specifications:
- output power: 150WPC minimum
- frequency response: 5Hz - 50KHz ± 1dB
- THD: <0.1% typ., <1% at rated power
- input sensitivity: 1.0V RMS
- input impedance: 200K Ohms
- dimensions: 14½"W x 7"H x 19"D
- weight: 55 lbs. ea.
- power requirements: 100V - 50/60Hz

Retail Price: ￥720,000

Reviews:

English: www.6moons.com

Perseus Preamplifier

For Audiophiles who demand the very best in vacuum tube preamplification, Rogue Audio provides it with the Perseus preamplifier. With astonishing accuracy, the Perseus reference preamplifier reveals all of the nuance and detail previously hidden in your recordings. The deep taught bass and sparkling highs are recreated with surgical precision. A sublimely smooth yet uncolored midrange provides the basis for musical experiences you will wish never to end. Equally impressive are the rock solid imaging and deep soundstage that provide unparalleled musical presence.

The Perseus is a feature rich preamplifier that includes a four tube line stage and an excellent high gain phono section. The phono section is user adjustable and compatible with almost all of todays high performance moving coil and moving magnet cartridges. Other features include a home theater bypass, metal remote control, subwoofer output, auto mute function and a slow start feature to prolong tube life. In keeping with Rogue Audio’s “quality by design” philosophy, only the finest components are used in the construction of the Perseus. Gold and silver abound as do ultra-high tolerance resistors, polypropylene capacitors, gold/ceramic tube sockets and all of the other exotic componentry so important to discerning audiophiles,. And to complete the picture, all of these technical features are captured in a sophisticated chassis design that artfully displays the exacting electronics contained within.

General Features:
- Four tube mu-follower design
- Massive power supply
- Slow start turn on sequencing
- Auto mute at turn on/turn off
- Home Theater bypass
- Subwoofer output
- Metal remote volume
- Heavy duty gold plated RCA inputs
- Machined aluminum faceplate and knobs
- All precision components
- Individually regulated filament supplies
- Alps volume and balance controls
- 4 input selections (Phono, CD, Tuner, Aux)
- 1 Home Theater input
- 3 outputs (1 fixed, 2 variable)
- 40 - 65 dB gain phono stage
- RIAA equalization within 0.25 DB
- User adjustable cartridge loading
- Detachable IEC power cord
- Fully tested, burned in and auditioned
- 2 year limited warranty (6 months on tubes)
- Proudly hand crafted in the USA

Specifications:
- Frequency response 5Hz – 50KHz +/- 1 dB
- THD <0.1%
- Gain line stage: 12 dB
- Gain phono stage: 65 dB
- Rated output: 1.5V RMS
- Output impedance: 450 ohms
- Maxcimum output: 20V RMS
- RIAA accuracy = +/- 0.25 dB
- Dimensions 18 ”W X 4.5 ”H X 14.5” D
- Weight 22 pounds
- Power requirements: 100V - 50/60Hz

Retail Price: ￥295,000

Stealth Phono Preamplifier

High performance low noise outboard mm/mc phono section.

General Features:
- Moving magnet (mm) or Moving coil (mc) operation
- High performance op amp circuit topology
- Precise RIAA equalization
- Massive fully regulated power supply
- Toroidal transformer
- Internal settings for 100, 300, 1000 and 47k Ohm loading
- Internal setting for 150 Picofared or 0 capacitance loading
- Four gain settings: 40dB, 50dB, 60dB, 65dB
- Ultra heavy-duty gold RCA inputs
- Precision components throughout
- Heavy machined aluminum faceplate
- Two heavy (2 ounce) copper circuit boards
- Teflon/silver plated hook-up wire
- Detachable IEC power cord
- Entirely designed and built in the USA
- 2 year limited warranty

Retail Price: ￥130,000